WTB IDE/PATA HDDs

Need help with your PC or Modding Projects?
Post Reply
User avatar
HungryGarou
24-bit
Posts: 143
Joined: Sat Dec 12, 2009 6:38 pm

WTB IDE/PATA HDDs

Post by HungryGarou »

I'm looking to find some cheap IDE Hard drives to use for the Ps2 and Original Xbox, preferably between 500 & 750gbs. I tried looking for some refurbished and used ones, but they weren't big enough in size and are a tad overpriced. Can anyone help me find some that are reasonably priced?
User avatar
jinn
128-bit
Posts: 569
Joined: Fri Jun 25, 2010 2:12 am
Location: California

Re: WTB IDE/PATA HDDs

Post by jinn »

for XBOX http://www.bestbuy.com/site/Western+Dig ... Id=8188962

For PS2 you can use the WD but will have to do a little modification to the Network Adapter.
Hitachi,Maxtor,Seagate and Samsung work great on the PS2.
This is the cheapest I found http://cgi.ebay.com/Hitachi-HCP72505GLA ... ltDomain_0
PSone, Xbox, PS2, DC, SS Mod Service, PM for details
Zandengoff
24-bit
Posts: 142
Joined: Tue Apr 10, 2007 1:47 am

Re: WTB IDE/PATA HDDs

Post by Zandengoff »

Really, 500-750 GB? I have a 320GB in my Ps2 and it is more than enough space. For the xbox I could see more as it is functionally complete.

Just a side note, for the xbox I have seen success stories for using ide to sata adapters, but I do not have specifics.
User avatar
CRTGAMER
Next-Gen
Posts: 11933
Joined: Tue Jan 05, 2010 11:59 am
Location: Southern California

Re: WTB IDE/PATA HDDs

Post by CRTGAMER »

A better deal, FRYS always beats Best Buy:
http://www.frys.com/product/5911044
Image
CRT vs LCD - Hardware Mods - HDAdvance - Custom Controllers - Game Storage - Wii Gamecube and other Guides:
CRTGAMER Guides in Board Guides Index: http://www.racketboy.com/forum/viewtopi ... 5#p1109425

Image
Image
User avatar
HungryGarou
24-bit
Posts: 143
Joined: Sat Dec 12, 2009 6:38 pm

Re: WTB IDE/PATA HDDs

Post by HungryGarou »

Looks tempting, but it's $15 higher than i want to spend. Plus they'll probably charge me $8~$10 shipping.
jinn wrote:For PS2 you can use the WD but will have to do a little modification to the Network Adapter.
Really? I looked at it's page on the PS2 HDD compatibility list, and according to the comments, it fits. If I'll have to do any hardmodding, I'll pass.

jinn wrote:Hitachi,Maxtor,Seagate and Samsung work great on the PS2.
This is the cheapest I found http://cgi.ebay.com/Hitachi-HCP72505GLA ... ltDomain_0
I've heard good things about the Maxtor drives, PS2 wise. I've been digging around Ebay to no avail. When i DID find something decent, they happened to not be listed on those HDD compatability list sites :? (Or i can waste my time in those pointless bidding wars that i'll never win :cry: ) Now if i can find one sized and priced reasonably...

CRTGAMER wrote:A better deal, FRYS always beats Best Buy:
http://www.frys.com/product/5911044
...That's a SATA drive. I'm looking specificly for an IDE/PATA one.
Zandengoff wrote:Really, 500-750 GB? I have a 320GB in my Ps2 and it is more than enough space.

I tried looking at smaller drives but there pretty overpriced, so i figured I'd at least go for something bigger around the same price range, but no luck. I plan to do a LOT of downloading as well.
Zandengoff wrote:Just a side note, for the xbox I have seen success stories for using ide to sata adapters, but I do not have specifics.
Yeah, i read about the whole ide to sata thing, but i cant find any solid info on that working and what drives they used. Until then, I'll stick with a IDE drive.
Pulsar_t
Next-Gen
Posts: 5935
Joined: Tue Jan 01, 2008 10:38 am

Re: WTB IDE/PATA HDDs

Post by Pulsar_t »

Is there a storage limit concerning how much space a PATA interface can address?
Thy ban hammer shalt strike Image
User avatar
jinn
128-bit
Posts: 569
Joined: Fri Jun 25, 2010 2:12 am
Location: California

Re: WTB IDE/PATA HDDs

Post by jinn »

I have been using SATA2IDE in several Xbox system with no problems.
Using WD-Green-Blue and black 1TB, 1.5TB and 2TB HDD.
If you need help or want to try it just PM me for details.

PS2
In order for the WD HDD to fit, you need to remove one screw from the network adapter and cut the metal plate. This will allow you to slide the power connector about 1/4 inch.
PSone, Xbox, PS2, DC, SS Mod Service, PM for details
Post Reply