Cheap 360 Repair Service?
-
lisalover1
- Next-Gen
- Posts: 4960
- Joined: Tue Jul 08, 2008 10:50 am
- Location: Redmond, WA
- Contact:
Cheap 360 Repair Service?
I recently got a broken launch 360 from one of my friends, since my first one got banned from Xbox Live [I was an idiot to hack it in the first place
], and I've been trying to find a shop that will repair it, and not charge an arm and a leg for the service. I haven't found a place yet that will do it for under $140. Does anybody know any good and relatively cheap repair service in Michigan for broken 360s? Or, can someone vouch for a legitimate online repair service?
Re: Cheap 360 Repair Service?
You could always buy a refurbished 360 on ebay.
http://cgi.ebay.com/Xbox-360-HDMI-conso ... 9755634161
http://cgi.ebay.com/Xbox-360-HDMI-conso ... 9755634161
Re: Cheap 360 Repair Service?
Saturn | Dreamcast | Jaguar | 3DO | PSX | PS2 | PS3 | NES | N64 | GameCube | Wii | PSP | GBA | DSi XL | 3DS XL
-
lisalover1
- Next-Gen
- Posts: 4960
- Joined: Tue Jul 08, 2008 10:50 am
- Location: Redmond, WA
- Contact:
Re: Cheap 360 Repair Service?
My 360 is really busted now; I just tried turning it on one more time, and now it doesn't even power on anymore! It used to just be 2 red rings.
- s1mplehumar
- Next-Gen
- Posts: 5143
- Joined: Fri May 16, 2008 2:26 pm
- Location: Ragol (FORREST 1)
- Contact:
Re: Cheap 360 Repair Service?
PM incoming.
Nintendo ID, PSN, XBL: Eronnicus * Steam ID: s1mplehumar * Switch Friend Code: SW-3270-7921-5525
Re: Cheap 360 Repair Service?
There's a place in Taylor, MI that will do it for $40. Let me know if you are interested in directions.
-
lisalover1
- Next-Gen
- Posts: 4960
- Joined: Tue Jul 08, 2008 10:50 am
- Location: Redmond, WA
- Contact:
Re: Cheap 360 Repair Service?
Sorry, Taylor is all the way on the other side of the state; it's about a 3-hour drive from where I live. Thank you, anyway, though... Unless the shop accepts repairs on systems mailed to them, that is.jfe2 wrote:There's a place in Taylor, MI that will do it for $40. Let me know if you are interested in directions.
Re: Cheap 360 Repair Service?
Make sure that if you are paying for a fix that it's done with a full reflow with a BGA workstation. Anything else isn't worth paying for. You're just paying for a couple of pence worth of parts and half an hour labour.
If you want to do it yourself, this is how i fixed mine. It's been working perfect since then, haven't had a single issue with it.
http://www.racketboy.com/forum/viewtopi ... 87#p243687
If you want to do it yourself, this is how i fixed mine. It's been working perfect since then, haven't had a single issue with it.
http://www.racketboy.com/forum/viewtopi ... 87#p243687
Marurun wrote:Don’t mind-shart your pants, guys
