ok, so I installed the modchip, everything worked. tested before I assembled the saturn back together, and it wont work when the saturn is assembled. If i have it open (the console) it works!
WTF am i doing wrong? lol
its been driving me insane for the past hour. I checked all the cables, and nothing is touching. everything is on as it should be.
quick video
Phantom Universal Sega Saturn Mod Chip Install Issue
-
BootyHunter57
- 8-bit
- Posts: 16
- Joined: Wed May 27, 2015 3:47 pm
Re: Phantom Universal Sega Saturn Mod Chip Install Issue
That sort of problem is always reaaaaaaally annoying.
When the console is closed, burns no longer load. But, if the console is closed, will official retail discs work? If so, that could narrow it down a little at least.
When the console is closed, burns no longer load. But, if the console is closed, will official retail discs work? If so, that could narrow it down a little at least.
-
BootyHunter57
- 8-bit
- Posts: 16
- Joined: Wed May 27, 2015 3:47 pm
Re: Phantom Universal Sega Saturn Mod Chip Install Issue
With the console open, everything was working fine. With the console clsed, backups didn't work. I fixed it already. I think it was a loose ribbon cable from the motherboard to the phantom chip. All is good nowZiggy587 wrote:That sort of problem is always reaaaaaaally annoying.
When the console is closed, burns no longer load. But, if the console is closed, will official retail discs work? If so, that could narrow it down a little at least.