A week ago, I got my modchip for my Model 2 32-pin Saturn. I taped (I don't have a soldering iron yet) the power wire to the power supply, and I looped the signal wire to do the A+B method. Now, the system works just fine, and games boot up without fail. However, I noticed that when my modchip is installed, the video signal gets "warpy," and loses fidelity. It's not bad, but it's definitely noticeable, and it's quite annoying. Now, as soon as I disconnect the wire loop, the signal gets clearer. I plug the loop back in, and the signal gets worse. Also , I moved the signal wire to the 32-pin chip, and same thing - the video signal degrades. I'm using a Saturn RF adapter. I was wondering, would a stereo AV cable help the solution, or is my problem likely internal? Thanks for everything - other than this minor annoyance, my chip works as advertised.
EDIT: I should note that channel 4 looks worse than channel 3, so I leave it on channel 3 most of the time, leading me to suspect the RF cable is the culprit, or that the modchip is producing some interference (I hope not!).
