Hey all. I did some searching and didn't come up with any results. Can anyone point me to a tutorial on removing the RF unit from a Famicom? The Famicom is AV modded already, but the cables were soldered directly to the unit, are short, and are pinched between the case. I've purchased 3.5mm jacks that do AV and have confirmed them to send the signal as expected, so now I'd like to work out getting that unit out so I can cram this jack in it's place. Any info is much appreciated.
Thanks!
Louis
Tutorial needed on removing the RF unit from a Famicom
Re: Tutorial needed on removing the RF unit from a Famicom
FYI, I see threads on http://www.famicomworld.com/forum/index.php?board=14.0 with information on this. I don't know why I didn't think to go there. Also FYI, I soldered the wires for the 3.5mm jack and tested it this morning and it worked! Yay! 