Seimitsu LS-32-01 help

[Radiant Hero]

I installed it into my HRAP Pro 2 SA, and for some reason just feels really loose when resting in the center. It wiggles from left to right very liberally, even though I had tested it on a few shmups and it still executes precise commands. Is this loose, wiggly feel common with all LS-32-01s?

[benevicious]

I installed it into my HRAP Pro 2 SA, and for some reason just feels really loose when resting in the center. It wiggles from left to right very liberally, even though I had tested it on a few shmups and it still executes precise commands. Is this loose, wiggly feel common with all LS-32-01s?

Can you be more specific?

Does it not snap back/return to center when you let it go?

Is the balltop wiggly? Almost like it needs to be screwed on tighter.

[Radiant Hero]

I am able to wiggle the shaft of my joystick left and right with my pinky as the joystick is resting in the neutral position. It's as if the entire shaft is loose.

[benevicious]

I can engage mine with just a pinky but it takes some pressure.

If it moves without any you could try tightening it, take the bottom off your case, put a flat screwdriver in the bottom slot of the joystick to hold it in place, twist screwdriver clockwise and balltop counter-clockwise.