Who wants to mod my Neo Geo AES for Component Video???

[skate323k137]

You're usually lookin at at least a couple hundred for a good upscan converter.

http://www.consolesandgadgets.co.uk/cat ... -1516.html

The advantage going that way though is that you can get japanese RGB/SCART cables for most consoles and use then on VGA. Euro/Japan SCART uses a different pin configuration, so you have to be sure they're japanese cables.

[vlame]

http://cgi.ebay.com/Sega-Genesis-1-Mega ... 288wt_1348

would this be compatible with the AES?

[skate323k137]

Edit; the pinouts are the same, but the shape of the din connector itself is different. If it would physically fit, it should work.

from http://www.digitpress.com/forum/showthread.php?t=82505
"The Neo Geo (all models) and Genesis 1 RGB cables are identical in construction.. I should know, I make them reguarly.

The only difference is, the connector for the Genesis 1 has to be 8 pin offset din, whereas for Neo Geo you can use offset din or circular din (circular is much easier and cheaper to find) "

However something like this may be a good bet instead of trying to track down an XRGB, but you'd pretty much want to make your own cables.

http://www.ambery.com/rgbcgatovgac.html

[Drakon]

I can do it for 100$ labour, and you pay for the parts and shipping. Neobitz should do the job. Just shoot me a pm if you're interested.

Do you have any photos of some of your previous work?

I have my own forum with worklogs of most of the things I've built

http://consolemods.freeforums.org/