Help!

[masonyes]

I'm trying to switch the hard-drives from my old computer to new computer. However one of the screws connected to the hard-drive will not reach contact with my screw driver because of a metal bar I have to reach it from an angle as you can see in the picture.

[Mozgus]

Worst drawing ever. I'm ganna guess you are removing it from some retail PC with non-standard case structure. They do that crap all the time. All you can do is get creative with whatever tools you have.

Or get destructive. That works sometimes too.

[GSZX1337]

You can get an L shaped screw driver, I've seen those floating around.

[fox099]

just take the hard drive bracket out of the case. most are screwed in to begin with anyways. if not, do you really need that screw?

[corn619]

Have to agree with Moz, that is a really awful drawing. And really funny as well. Anyways make your tool, bend a screw driver to meet your needs. Use a vice, be smarter than bracket your trying to remove. Thats what my teacher used to say and it makes sense.

[lordofduct]

photobucket photobucket photobucket


they don't force ads on you like all the others do... ugh.