XBOX 360 , Coolrunner 4 coming soon

[s8n]

http://team-xecuter.com/forums/showthread.php?t=145432


hi members , ive been following this and the above link was released about 50 minutes ago


you guys interested in these ?


ive estimated they will be at the usual places to buy in 2 - 2 1/2 months , ive been learning RGH for some weeks now and researching better soldering supplies ( solder and flux ) than the basic stuff you buy at Radioshack etc

the better your soldering the better your glitch times...........


anyways hope you find this interesting

chat soon

[KalessinDB]

Well I know I'm going to want to get a full mod done on my 360, but just goes to show how out of the loop I was, I thought with RGH you didn't need a physical mod chip like the Coolrunner.

It's a ways down my list of desired mods though, so I suppose I have time to research. Thanks for the heads up!

[casterofdreams]

I am, by and large, a complete idiot regarding these things, especially for the 360. What are these mod chips used for? Can they be used on all 360s including the Xbox 360 E variant (latest release)?

My knowledge on this subject goes as far as the original Xbox with soft modding. With a mod chip you can turn it into a media center running all sorts of nonsense media. How, I haven't a clue. Could we be able to do the same with the 360?

[s8n]

Well I know I'm going to want to get a full mod done on my 360, but just goes to show how out of the loop I was, I thought with RGH you didn't need a physical mod chip like the Coolrunner.

I am, by and large, a complete idiot regarding these things, especially for the 360. What are these mod chips used for?

the Coolrunner line of glitch chips sends a tiny pulse to the processor and then allows ( i think ) a bootloader to run.

which in turn you can launch unsigned code like Freestyle Dash , its a Dash where you can load games from a external Hard Drive etc.............

Can they be used on all 360s including the Xbox 360 E variant (latest release)?

im not sure if they are supported but from memory Xenon are not supported

[s8n]

just letting you guys know Coolrunner 4 is about 4 weeks away from release................


there have been some delays but it looks like the above is the release time


any of you guys going to get one and install it ? or have a modder install it for you ?


ive already pre-ordered 3 and have a 360 i bought just for a install , if its a success im going to buy another 360 and see if i can get success again etc..........


if i can get 3 working 360's ill feel confident in my skill , ive been researching how to install them and flash the NAND for months now


after that im going rampant and going to do my 7 untouched Japanese 360's and also buy more second hand 360's


the aim is to own about 15 total

[KalessinDB]

I'll probably want it done eventually. Depending on price and if I can find someone locally to do it (considering it'll cost me another $35-40 easy just to ship my system back and forth to a modder)

[s8n]

from what ive seen prices to do the mod is $50 and then the hardware on top.............


also these are the best Coolrunner to date and the previous are hard to find now and sold out in some places so i would recommend putting it on your priority list


and get someone reliable to do the install as some of the dodgy ones do bad work and use fake Coolrunners

[KalessinDB]

I'll probably just buy the chip myself to make sure I can get it, $50 isn't that killer, then at some point when I have cash either scrounge up someone locally (I got a couple buddies who are handy with soldering irons) or just suck it up and mail it off to someone from here that I know I can trust, and there's a couple I've had do work before.

[s8n]

I'll probably just buy the chip myself to make sure I can get it

thats a good idea , go to Team Xecuter ' Where to Buy ' for reputable sellers of the modchip.


http://team-xecuter.com/where-to-buy/

[s8n]

i just remembered your going to need QSB's ( Quick Solder Boards ) and a J-R Programmer that is if a friend does the install


a modder will already have a J-R Programmer


the Programmer flashes the NAND and the Coolrunner is the modchip



http://www.modsupplier.com/catalog/xecu ... -1097.html