If anyone can point me in the right direction that would be great.
Anyone that can mod my Hori RAP 3?
-
ninjainspandex
- Next-Gen
- Posts: 4574
- Joined: Fri Aug 12, 2011 7:32 pm
- Location: Hartland Wisconsin
Anyone that can mod my Hori RAP 3?
Anyone know anyone good who can do a real professional mod of my Hori RAP? I need it to be dual modded for Sega Saturn and PS1 and Siemitsu stick and buttons with this color scheme and custom artwork. (I believe this template is for the Madcatz stick but perhaps it can be modified?)
If anyone can point me in the right direction that would be great.
If anyone can point me in the right direction that would be great.
-
mjmjr25
Re: Anyone that can mod my Hori RAP 3?
There are a number of guys on SRK who do commission stick mods.
When you say PS1 / SAT, do you want it to be 2 official cables coming out of it? Or just PS and then an adapter?
You can use a Multi Console Cthulhu pcb with R45 jacks and then the stick could be used for everything from NES--->Gamecube eras, with the exception of N64. That PCB is about $40 last I checked, R45 jack is $7-10, and each cable is about $10 to have made if you provide the original controller cable.
There are generic templates for most mainstream sticks, including the HRAP, you just need to find someone to download the artwork. Most will tell you go "go to staples"...but i'd pay someone with a factory quality printer and vinyl - just get it done and done right the first time.
Starting from scratch and paying for the original stick, the McC pcb, R45 jack and all cables, artwork plus the commission on the build, should run about $250-275 total.
I can recommend a few guys if interested, pm me.
When you say PS1 / SAT, do you want it to be 2 official cables coming out of it? Or just PS and then an adapter?
You can use a Multi Console Cthulhu pcb with R45 jacks and then the stick could be used for everything from NES--->Gamecube eras, with the exception of N64. That PCB is about $40 last I checked, R45 jack is $7-10, and each cable is about $10 to have made if you provide the original controller cable.
There are generic templates for most mainstream sticks, including the HRAP, you just need to find someone to download the artwork. Most will tell you go "go to staples"...but i'd pay someone with a factory quality printer and vinyl - just get it done and done right the first time.
Starting from scratch and paying for the original stick, the McC pcb, R45 jack and all cables, artwork plus the commission on the build, should run about $250-275 total.
I can recommend a few guys if interested, pm me.