HELP WITH SATURN - Not sure if mod is done correctly PICS

[mattyboy79]

I started another thread how my saturn was not recognising burnt cds. I have opened up my saturn and seen that A+B method was used.

i took my saturn to a console repairer to mod it for me while i waited. I am now also unsure whether my saturn is a 32 pin or 64.

Could the signal wire or A+B method be the cause of this ?

There is no blue signal wire on the chip anymore as it has been cut off bu the installer.

Is my chip ruined of can i fix it. If it is this at all.

here are links to pictures of my saturn. What type do i have and is this mod done correctly.

could the signal wire be causing this

https://www.dropbox.com/s/hmt5reb9yl4eg ... 204520.jpg
https://www.dropbox.com/s/r5jhxbyxfo3no ... 204510.jpg
https://www.dropbox.com/s/a1al8zhn71r9l ... 204502.jpg
https://www.dropbox.com/s/dqdt85e5a7xo5 ... 202759.jpg
https://www.dropbox.com/s/s9yftxy6tsebb ... 204401.jpg

[s8n]

your Saturn is a 64Pin IC


check this link below , it shows how your modchip should be installed. According to the guide A+B method cant be used on a JPN 64Pin Saturn.


http://www.segastyle.com/model264.html


i use Robb Webbs Saturn chips ive done 7 installs to my JPN Saturns all with success , some were 32 Pin and some 64 Pin

[mattyboy79]

So that is what is giving me trouble.

Is robs chip better for 64 pin?

[mattyboy79]

Just do a google search to find it or can I buy from that site?

Thanks man ur a lifesaver

[mattyboy79]

Sorry for all the posts in a row.

Is my chip able to be saved or do I need a new one?

[s8n]

So that is what is giving me trouble.

Is robs chip better for 64 pin?

i think Robb Webbs chips are the better chip , for any Saturn

Just do a google search to find it or can I buy from that site?

Thanks man ur a lifesaver

if your talking about Robb Webbs chips theres a email link on his site where you email him with your order and figure out a payment method.