Modded Saturn + Action Replay = No Go?

Need help with your PC or Modding Projects?
Post Reply
jakethesnake
Newbie
Posts: 2
Joined: Sun Feb 10, 2013 1:21 pm

Modded Saturn + Action Replay = No Go?

Post by jakethesnake »

I recently bought a racketboy modchip for my model 2 64 pin Saturn (non Sanyo). Installing was easy enough, the only quirk of the system is that if I place a disc in the cd drive (Original or backup), it takes me to the audio CD screen where I simply have to pop the lid and close it again to get the start application option and everything is fine.

So, onto my issue, I have been pulling my hair out over some games and just bought an Action replay plus 4 in 1 to use some codes. The problem is, when I boot the system w/ the AR in the cart slot and cd in the drive, it goes to the standard AR screen where I can select cheats and so on. When I try to start the disc though, it simply says Loading... and freezes there (original OR backup). I tried popping the lid and shutting it to no avail.

So, by this logic, the AR is a total waste because I would be unable to play my official copy of Metal Slug even.
Does anyone know of a workaround? Do I need to buy a 32pin Saturn?
Help me oh wise ones!!
User avatar
marurun
Moderator
Posts: 12406
Joined: Sat May 06, 2006 8:51 am
Location: Cleveland, OH
Contact:

Re: Modded Saturn + Action Replay = No Go?

Post by marurun »

Moved to Technical Help.
Saskatoonguy
8-bit
Posts: 32
Joined: Fri Jan 11, 2013 2:12 pm

Re: Modded Saturn + Action Replay = No Go?

Post by Saskatoonguy »

I am going to guess your laser is beginning to fail.

Get out a multimeter and take note of your resistance, and lower the resistance by 50-100.

Then test again.
User avatar
Hobie-wan
Next-Gen
Posts: 21705
Joined: Sat Aug 15, 2009 8:28 pm
Location: Under a pile of retro stuff in H-town
Contact:

Re: Modded Saturn + Action Replay = No Go?

Post by Hobie-wan »

So what does it do with the mod chip out and the AR in?
jakethesnake
Newbie
Posts: 2
Joined: Sun Feb 10, 2013 1:21 pm

Re: Modded Saturn + Action Replay = No Go?

Post by jakethesnake »

Ok, so I think I got it working. All I needed to do was, at the AR screen, pop the lid and shut it again. After that the games load like a charm!
Strange that my Saturn mod always requires the lid to be opened and shut before working... Anyone else have that problem?

BTW, I tried taking the mod chip out and booting w/ the AR and it works normally as expected, so I don't think it's a lens/laser issue.
User avatar
Hobie-wan
Next-Gen
Posts: 21705
Joined: Sat Aug 15, 2009 8:28 pm
Location: Under a pile of retro stuff in H-town
Contact:

Re: Modded Saturn + Action Replay = No Go?

Post by Hobie-wan »

Maybe something to do with the fact you're on a 64 pin Saturn making it extra funky. At least you have a workaround without having to tweak anything.
skate323k137
Next-Gen
Posts: 1271
Joined: Sun Sep 16, 2007 11:26 am
Location: Lansing, MI

Re: Modded Saturn + Action Replay = No Go?

Post by skate323k137 »

This (having to open/close the lid) is "normal" on the 64pin IC boards. If you hadn't figured it out, I would have pointed you to this post:

http://racketboy.com/forum/viewtopic.ph ... 8&start=21

That thread solved years of headaches for me lol
Image
Need FreeMCboot? I'll install it on your PS2 Memory Card for free if you cover postage both ways.
Consoles: I have too much stuff
Arcade: No seriously, I have too much stuff. Someone grab a shovel and dig me out of my basement.
Post Reply