Is it possible to make a sega saturn s-video cable

Need help with your PC or Modding Projects?
treepop
24-bit
Posts: 115
Joined: Tue Apr 10, 2012 2:59 pm

Re: Is it possible to make a sega saturn s-video cable

Post by treepop »

Curious. If I mod only the video and leave the av plug in for sound, wont this mean the system is outputting video on the composite and s-video lines? Or is that not how it works?
User avatar
Hobie-wan
Next-Gen
Posts: 21705
Joined: Sat Aug 15, 2009 8:28 pm
Location: Under a pile of retro stuff in H-town
Contact:

Re: Is it possible to make a sega saturn s-video cable

Post by Hobie-wan »

You'd be able to hook up 2 TVs yes, as long as the output signal was strong enough for there to be a load on both.
skate323k137
Next-Gen
Posts: 1271
Joined: Sun Sep 16, 2007 11:26 am
Location: Lansing, MI

Re: Is it possible to make a sega saturn s-video cable

Post by skate323k137 »

The output would be present, but there'd be no load on the circuit unless you connected the composite video cable to a TV. If you just tap the s-video from the bottom of the jack, the normal composite A/V cable is fine to use for sound, and just leave the video plug unplugged on the TV end (honestly, plugging it in is really unlikely to hurt anything at all).
Image
Need FreeMCboot? I'll install it on your PS2 Memory Card for free if you cover postage both ways.
Consoles: I have too much stuff
Arcade: No seriously, I have too much stuff. Someone grab a shovel and dig me out of my basement.
User avatar
Ziggy
Moderator
Posts: 14913
Joined: Mon Jun 09, 2008 5:12 pm
Location: NY

Re: Is it possible to make a sega saturn s-video cable

Post by Ziggy »

You can safely plug both in if you wanted. I've done this countless times on different systems so that I could compare composite and S-Video.
User avatar
SaturnHST
24-bit
Posts: 134
Joined: Wed Oct 12, 2011 10:40 pm
Location: USA

Re: Is it possible to make a sega saturn s-video cable

Post by SaturnHST »

I keep seeing this guy sell s-video adapters for Saturn:

http://www.ebay.com/itm/S-video-for-the ... 7675.l2557

Does anyone have any info about it?
User avatar
Hobie-wan
Next-Gen
Posts: 21705
Joined: Sat Aug 15, 2009 8:28 pm
Location: Under a pile of retro stuff in H-town
Contact:

Re: Is it possible to make a sega saturn s-video cable

Post by Hobie-wan »

SaturnHST wrote:I keep seeing this guy sell s-video adapters for Saturn:

http://www.ebay.com/itm/S-video-for-the ... 7675.l2557

Does anyone have any info about it?
Well, looks like it is a convenient box that fits in there that you have to solder anyway. It is probably just the plugs in a plastic box with the wires, but that's a pretty good idea. Just leave enough wire length so you can pop it out to get to change batteries.
treepop
24-bit
Posts: 115
Joined: Tue Apr 10, 2012 2:59 pm

Re: Is it possible to make a sega saturn s-video cable

Post by treepop »

SaturnHST wrote:I keep seeing this guy sell s-video adapters for Saturn:

http://www.ebay.com/itm/S-video-for-the ... 7675.l2557

Does anyone have any info about it?

Oddly enough. In the picture it looks like he is using his own box to power the sound, but not the video. Not the plug in the actual video out slot of the Saturn.
treepop
24-bit
Posts: 115
Joined: Tue Apr 10, 2012 2:59 pm

Re: Is it possible to make a sega saturn s-video cable

Post by treepop »

Weird. The game randomly is saying my control pad is disconnected. It doesn't happen often but it happened 3 times whiles playing mega man X4. Could this be related to maybe some grounds not being properly grounded? (I am still using my gheto plug thing)

I wouldn't think it would have anything to do with it, but you guys know more than I.
User avatar
Ziggy
Moderator
Posts: 14913
Joined: Mon Jun 09, 2008 5:12 pm
Location: NY

Re: Is it possible to make a sega saturn s-video cable

Post by Ziggy »

treepop wrote:Weird. The game randomly is saying my control pad is disconnected. It doesn't happen often but it happened 3 times whiles playing mega man X4. Could this be related to maybe some grounds not being properly grounded? (I am still using my gheto plug thing)

I wouldn't think it would have anything to do with it, but you guys know more than I.
Does this happen with all your controllers, or just one?

I don't know if this is the problem you're having, but I've had this happen to me once...

I got a Sega brand model 2 Saturn controller from a buddy, but it didn't work. When I finally decided to take a look at it, the fix was so easy. In the connector plug (that plug that you plug into the console) one of the pins was pushed back. You can use a small flat head screwdriver to crack open the plug. All the pins are in grooves. One pin was pushed back in the groove, so it was not making contact when plugged in. All I had to do was push that pin back up. I added a little hot glue back by the wires for good measure, as I could see it eventually sliding back again.

So you might wanna check that. Maybe there's a pin in your plug that's pushed back, but not far enough so that it never makes contact. Perhaps it's right on the verge, so that it makes contact most of the time but will some times lose the connection (at which point you get the "no controller" message). Get a flash flight and look at the pins in the plug. Make sure all the pins are where they should be. Compare it to another controller, if possible.
treepop
24-bit
Posts: 115
Joined: Tue Apr 10, 2012 2:59 pm

Re: Is it possible to make a sega saturn s-video cable

Post by treepop »

Ziggy587 wrote:
treepop wrote:Weird. The game randomly is saying my control pad is disconnected. It doesn't happen often but it happened 3 times whiles playing mega man X4. Could this be related to maybe some grounds not being properly grounded? (I am still using my gheto plug thing)

I wouldn't think it would have anything to do with it, but you guys know more than I.
Does this happen with all your controllers, or just one?

I don't know if this is the problem you're having, but I've had this happen to me once...

I got a Sega brand model 2 Saturn controller from a buddy, but it didn't work. When I finally decided to take a look at it, the fix was so easy. In the connector plug (that plug that you plug into the console) one of the pins was pushed back. You can use a small flat head screwdriver to crack open the plug. All the pins are in grooves. One pin was pushed back in the groove, so it was not making contact when plugged in. All I had to do was push that pin back up. I added a little hot glue back by the wires for good measure, as I could see it eventually sliding back again.

So you might wanna check that. Maybe there's a pin in your plug that's pushed back, but not far enough so that it never makes contact. Perhaps it's right on the verge, so that it makes contact most of the time but will some times lose the connection (at which point you get the "no controller" message). Get a flash flight and look at the pins in the plug. Make sure all the pins are where they should be. Compare it to another controller, if possible.
Awesome. thanks for the tip. I will check it out
Post Reply