SNES Help/Questions

NES, SNES, N64, Gamecube, Wii
User avatar
flojocabron
Next-Gen
Posts: 4155
Joined: Thu Aug 19, 2010 2:15 am
Location: on the border

Re: SNES Help/Questions

Post by flojocabron »

congrats on your new snes!

it might take a while to get you collection started, but dont lose faith.

One thing you may have to do in the near future is to mod yor system to make it play japanese games. All you have to do is remove the two tabs inside. no mod chip necessary.

But if you can, get a second snes. that way you can use that one for jpn games.

Some games may be cheaper this way. they are still playable in any language.

good luck and keep us posted on anything else you need or any other cool stuff you find.
2600 and jr,5200,nes/top loader, master system, intellivision, TG-16, genesis 1,2,3, SNES, snesJR, CDX, 3DOfz10, gamegear, gameboy and pocket, GBC, sega saturn, PSOne w/screen, Virtual Boy, N64, NGPC, Gameboy Advance sp, Dreamcast, Black Dreamcast, oXBOX, Playstation 2, PStwo, Gamecube, gameboy player, DS lite,DSi XL, PSP1000/3000,Wii,PS3 120gb,3DSXL, xbox 360, PSvita, PS4
ice445
24-bit
Posts: 159
Joined: Fri Aug 31, 2012 10:48 pm

Re: SNES Help/Questions

Post by ice445 »

Do you guys think I should clean the system pin set? I got F-Zero today and it's the second game that wouldn't boot at all until I cleaned the contacts thoroughly. Just bad luck or what?
harper
Next-Gen
Posts: 2532
Joined: Tue Aug 23, 2011 8:40 pm

Re: SNES Help/Questions

Post by harper »

ice445 wrote:Do you guys think I should clean the system pin set? I got F-Zero today and it's the second game that wouldn't boot at all until I cleaned the contacts thoroughly. Just bad luck or what?
It's pretty common to find games that are horribly dirty due to being in storage/not being used for years. I've gotten to the point where I won't even test a game until I've cleaned the contacts, just so I won't risk any build up of dust and dirt in my consoles. Just keep those suckers clean and everything should be fine. :)
RyaNtheSlayA
Next-Gen
Posts: 9201
Joined: Fri Mar 14, 2008 4:56 pm
Location: Denver CO, USA

Re: SNES Help/Questions

Post by RyaNtheSlayA »

Basically that ^

There are plenty of SNES dust covers on eBay as well to keep the pins dust free.
Older. Not wiser.
ice445
24-bit
Posts: 159
Joined: Fri Aug 31, 2012 10:48 pm

Re: SNES Help/Questions

Post by ice445 »

harper wrote:
ice445 wrote:Do you guys think I should clean the system pin set? I got F-Zero today and it's the second game that wouldn't boot at all until I cleaned the contacts thoroughly. Just bad luck or what?
It's pretty common to find games that are horribly dirty due to being in storage/not being used for years. I've gotten to the point where I won't even test a game until I've cleaned the contacts, just so I won't risk any build up of dust and dirt in my consoles. Just keep those suckers clean and everything should be fine. :)
Well the thing is I already cleaned F-Zero before putting it in. Although I guess I just didn't get all the dirt because a second swipe produced a bit more black stuff. Then it worked after that.
ice445
24-bit
Posts: 159
Joined: Fri Aug 31, 2012 10:48 pm

Re: SNES Help/Questions

Post by ice445 »

Minor problem, my controller seems to be glitching when it comes to F-Zero. The game doesn't always register when I press the trigger buttons (The right more than the left), so I can't do the special turn most of the time. Is this a controller or a system problem?
User avatar
ApolloBoy
128-bit
Posts: 954
Joined: Mon Nov 15, 2010 8:56 pm
Location: San Jose, CA

Re: SNES Help/Questions

Post by ApolloBoy »

ice445 wrote:Minor problem, my controller seems to be glitching when it comes to F-Zero. The game doesn't always register when I press the trigger buttons (The right more than the left), so I can't do the special turn most of the time. Is this a controller or a system problem?
Did you try it with another controller?
Own: 2600, 2DS, 2DS XL, 360 S, 5200, 7800, 800, 800XL, AES, Amiga 600, C64, C64C, CV, DC, Duo-R, GB, GBA, GBA SP, GBC, GBP, Genesis 2, GG, JP SMS, Lynx, Mark III, Mega CD II, MD, MSX2+, N64, NES, NES top loader, Nomad, PCE, PSX, PS2, RetroUSB AVS, SAT, SFC, SG-1000 II, SMS, SNES mini, Switch, TE, Twin Fami, VIC-20, Wii, XEGS
ice445
24-bit
Posts: 159
Joined: Fri Aug 31, 2012 10:48 pm

Re: SNES Help/Questions

Post by ice445 »

ApolloBoy wrote:
ice445 wrote:Minor problem, my controller seems to be glitching when it comes to F-Zero. The game doesn't always register when I press the trigger buttons (The right more than the left), so I can't do the special turn most of the time. Is this a controller or a system problem?
Did you try it with another controller?
Only have one. I fixed it for the most part by cleaning the cart some more. Now it works consistently.
Final Form
Newbie
Posts: 12
Joined: Mon Sep 10, 2012 7:31 pm
Location: Ohio

Re: SNES Help/Questions

Post by Final Form »

ice445 wrote:
ApolloBoy wrote:
ice445 wrote:Minor problem, my controller seems to be glitching when it comes to F-Zero. The game doesn't always register when I press the trigger buttons (The right more than the left), so I can't do the special turn most of the time. Is this a controller or a system problem?
Did you try it with another controller?
Only have one. I fixed it for the most part by cleaning the cart some more. Now it works consistently.
Just like the cartridges, sometimes the controllers might need cleaned out too. I bought a Genesis controller recently and the "C" button wasn't responding well. All you have to do is unscrew the bolts and clean the contacts with alcohol. If you fixed it by cleaning the cart some more then congrats, but if it keeps acting up you could always reference YouTube for better instructions.

First one that came up: http://www.youtube.com/watch?v=hzybDNChNeU

EDIT: If you have another game that uses the shoulder buttons that could be another way to check.
ice445
24-bit
Posts: 159
Joined: Fri Aug 31, 2012 10:48 pm

Re: SNES Help/Questions

Post by ice445 »

So I'm pretty sure the cartridge slot on the console is dirty, becuase it won't play ANYTHING that hasn't been thoroughly cleaned (and I mean thoroughly, like 2 q-tip alcohol scrubs). I tried the shirt trick but that didn't work (no dirt on it). The "pull up slightly" thing isn't it either. Any ideas what to do>
Post Reply