Mod JP White Saturn (Sanyo)

Post by **TEKWRX** » Fri Sep 01, 2006 9:06 pm

Has anybody been able to install racketboy's mod chip in a White Saturn with the Sanyo board? All the guides on the 'net are outdated and none of the pics work. I tried the standard A+B method, but then it just boots to the CD player, orginal games or burned. I gather that I need to solder to "pin 7 on the sanyo chip", but there are 3 of them! Any ideas?

Post by **Pullmyfinger** » Sat Sep 02, 2006 3:40 am

I tried it too, with no success and could not get much help.

Post by **TEKWRX** » Sat Sep 02, 2006 10:14 am

That's great, $100 down the drain...

Post by **racketboy** » Sat Sep 02, 2006 10:25 am

You tried this?:
http://www.racketboy.com/saturn-modchip ... nstall.htm

Post by **TEKWRX** » Sat Sep 02, 2006 11:32 am

Yeah, I think i've tried just about everything. Mine is not the same as that, there is no PC Trap. I found out that I need to connect the signal wire to the 71st leg of the bottom Sanyo IC, and I did that, but I still get the same result. Originals or back-ups go right to the CD Player. When I get home from work tonight I'll take a buch of pics and you guys can maybe see where I went wrong.

Post by **racketboy** » Sat Sep 02, 2006 11:34 am

I'm pretty sure its possible -- I've just never done one of those...

Post by **Pullmyfinger** » Sat Sep 02, 2006 5:26 pm

TEKWRX wrote:Yeah, I think i've tried just about everything. Mine is not the same as that, there is no PC Trap. I found out that I need to connect the signal wire to the 71st leg of the bottom Sanyo IC

Where did you read that, any more info on it? Might try on mine

Post by **TEKWRX** » Sat Sep 02, 2006 11:29 pm

Pullmyfinger wrote:
TEKWRX wrote:Yeah, I think i've tried just about everything. Mine is not the same as that, there is no PC Trap. I found out that I need to connect the signal wire to the 71st leg of the bottom Sanyo IC
Where did you read that, any more info on it? Might try on mine

Check out the pinned Saturn Mod thread at segaxtreme. They talk about it on page 38

http://forums.segaxtreme.net/showthread ... 49&page=38

Post by **TEKWRX** » Sat Sep 02, 2006 11:30 pm

I have everything hooked up properly, is it possible the chip is no good?

Post by **Pullmyfinger** » Sun Sep 03, 2006 3:02 pm

I thought that was the case with mine, but I tried it on my american black saturn and it worked perfectly