Any advice on getting xboxes?

Gaming on the Playstation and Xbox Platforms
User avatar
sabrage
Next-Gen
Posts: 2588
Joined: Fri Dec 30, 2011 5:47 pm
Location: GMT -7

Re: Any advice on getting xboxes?

Post by sabrage »

Fixing a red ring is really not that hard. If you've ever installed a processor in a computer, it's basically the same process.
User avatar
isiolia
Next-Gen
Posts: 5785
Joined: Mon May 16, 2011 1:52 pm
Location: Virginia

Re: Any advice on getting xboxes?

Post by isiolia »

BoringSupreez wrote:
isiolia wrote:There's a 10th anniversary bundle coming out for Europe that makes me wonder if we'll see something similar stateside.
That would be awesome. Especially if they made a limited-edition 360 that looked like an oXbox. I'd have to buy that.
Heh, well, they missed the deadline considering it's a 10th anniversary for the XBox, which came out several months earlier in the U.S.

Just a bigger game bundle n' all though (here).

The Star Wars 360 is coming early April, but it's expensive.

Fixing a red ring is really not that hard. If you've ever installed a processor in a computer, it's basically the same process.
Ehhhh, reflowing solder vs putting a chip in a socket and closing a lever?
ZenErik
Next-Gen
Posts: 4185
Joined: Sat Apr 09, 2011 12:15 am
Location: Boston

Re: Any advice on getting xboxes?

Post by ZenErik »

Before the flood in Thailand it made sense to get a 360 with no hard drive, and then just buy a hard drive on eBay. After the flood and the drastic increase in hard drive prices it doesn't make that much of a difference. Although prices are finally dropping!
My B/S/T thread! :)
Switch ID: ??? ||| PSN ID: ZenErik (PS4) ||| Steam: Erikdayo
DinnerX
Next-Gen
Posts: 1537
Joined: Fri May 06, 2011 7:57 pm
Location: Trapped in a Karate Kid cartridge

Re: Any advice on getting xboxes?

Post by DinnerX »

Thanks for all the info isiola. Looks like I'll be wanting a harddrive after all.
isiolia wrote:Main complaint I recall seeing about the Slim was that it still doesn't lock the disc well, so, try not to knock it around while playing (which you probably should avoid in general :lol: ).
Well, there go the croquet plans.
BoringSupreez wrote:I say get both, but if you're only getting one for now, go with the oXbox. oXbox stuff is as cheap as it'll ever be, while 360s will only get cheaper.
Yeah, as much as I'd like to get a 360 now I probably will wait a little longer. I might even hold out until the new xbox comes out.

Looks like I'll be buying an oxbox locally if I can. That way I can check to see if it has the unreliable thompson drive.
Since this signature affects old posts, I'm leaving a message here in case anyone searches for my username. This account died in early 2013. I am no longer a fundamentalist.

Don't add to my problems by pretending my past views are still held in the present. I do not have any patience for that. Feel free to ask me what I think now.
ZenErik
Next-Gen
Posts: 4185
Joined: Sat Apr 09, 2011 12:15 am
Location: Boston

Re: Any advice on getting xboxes?

Post by ZenErik »

If you ever develop an interest in shmups then the 360 will be quite nice for you. :mrgreen: :mrgreen:
My B/S/T thread! :)
Switch ID: ??? ||| PSN ID: ZenErik (PS4) ||| Steam: Erikdayo
User avatar
sabrage
Next-Gen
Posts: 2588
Joined: Fri Dec 30, 2011 5:47 pm
Location: GMT -7

Re: Any advice on getting xboxes?

Post by sabrage »

isiolia wrote:
Fixing a red ring is really not that hard. If you've ever installed a processor in a computer, it's basically the same process.
Ehhhh, reflowing solder vs putting a chip in a socket and closing a lever?
That's a different issue entirely. I reapplied the thermal compound and put screws and washers where there was once a bracket. That's it.
Last edited by sabrage on Thu Mar 08, 2012 6:58 pm, edited 1 time in total.
DinnerX
Next-Gen
Posts: 1537
Joined: Fri May 06, 2011 7:57 pm
Location: Trapped in a Karate Kid cartridge

Re: Any advice on getting xboxes?

Post by DinnerX »

ZenErik wrote:If you ever develop an interest in shmups then the 360 will be quite nice for you. :mrgreen: :mrgreen:
Actually, I do like shmups. Aren't a lot of the 360 shmups japanese? Are most of them region free?
Since this signature affects old posts, I'm leaving a message here in case anyone searches for my username. This account died in early 2013. I am no longer a fundamentalist.

Don't add to my problems by pretending my past views are still held in the present. I do not have any patience for that. Feel free to ask me what I think now.
ZenErik
Next-Gen
Posts: 4185
Joined: Sat Apr 09, 2011 12:15 am
Location: Boston

Re: Any advice on getting xboxes?

Post by ZenErik »

DinnerX wrote:
ZenErik wrote:If you ever develop an interest in shmups then the 360 will be quite nice for you. :mrgreen: :mrgreen:
Actually, I do like shmups. Aren't a lot of the 360 shmups japanese? Are most of them region free?
A good portion of them are region free or have been released in Europe or the US. And the Euro release of DFK will work on US consoles. 3 of my favorites are region locked.
My B/S/T thread! :)
Switch ID: ??? ||| PSN ID: ZenErik (PS4) ||| Steam: Erikdayo
User avatar
SirPsycho
24-bit
Posts: 177
Joined: Wed Aug 03, 2011 8:27 pm
Location: Manhattan, KS
Contact:

Re: Any advice on getting xboxes?

Post by SirPsycho »

sabrage wrote:
isiolia wrote:
Fixing a red ring is really not that hard. If you've ever installed a processor in a computer, it's basically the same process.
Ehhhh, reflowing solder vs putting a chip in a socket and closing a lever?
That's a different issue entirely. I reapplied the thermal compound and put screws and washers where there was once a bracket. That's it.
He just described the futureproof, ain't gonna break for years fix. I fix Red Rings almost everyday and just applying the screws and thermal could fix it for a few hours, a few days, months, or forever. It depends on how much its used and the care it receives.

MS used lead free solder which cracks quite easily under heat, and is cheap. Reflowing the CPU and GPU's solder on top of getting rid of the crappy x-clamps and putting in spacer screws is a more complete and reliable fix.
scikoolaid
8-bit
Posts: 35
Joined: Mon Mar 23, 2009 1:15 am

Re: Any advice on getting xboxes?

Post by scikoolaid »

Giving your system at least a half inch off whatever surface you have it will make a huge difference in the efficiency of cooling it will receive. After playing your system for a few hours, then turning it off, then feeling the bottom side, (please don't ever stand up your system) if its just as burning hot as the back side fan exhaust mesh, then you have heat pocketing in the vital area the chips reside in. I personally use 4 bottle caps to elevate my xbox and ps3.
Post Reply