Joystick Art Label

[gennss]

Is there anywhere online that you can just order the semi laminated label?

Where can I get high quality art for printing?

[vlame]

staples/office max, have then print it then laminate it....go to SRK forums to get the correct size and layout.

[gennss]

and sticking it on?

[vlame]

You can try vinyl print that is self adhesive, Some smaller shops sell custom vinyl prints with a adhesive backing. LamiLable is just a laminated paper print with an adhesive backing. If you can't get Laminated art with a adhesive backing, spray on adhesive and double-sided carpet tape (Indoor) would also work.

other ideas: Orafol adhesive artwork, custom plexiglass so you can just buy it once and switch it out if you feel like it.

[Lodestar]

http://www.tek-innovations.com

This site offers printing.

[jay_red]

Ok, what you need to do is get your artwork ready, take it to your local Kinko's (now known as Fedex Office) Get an 11x17 print of your art (will cost you 1.78) then use what they call "Lami-Label" that will run you another 3.99. After some careful cutting and patience you will end up with something like this:





Source: I work there lol.

[vlame]

how did you cut the buttons? how does it stay on?

[jay_red]

how did you cut the buttons? how does it stay on?

I used an exacto knife to cut out the buttons, it doesnt need to be percicse because the rim of the buttons cover the edges so close enough is fine. The material I mentioned "Lami-Label" is lamination with an adheisive back that works like a sticker.

[vlame]

sweet.