Coleco Vision AV cord

[GamersInControl]

Does anyone know if a NES RF will work on a Coleco Vision? Or have any other way to hook up a Coleco Vision to a modern TV?

[flojocabron]

I cant be too sure but I think the atari one works for it too

If you have no cable, just tear a red and white audio cable and use one of them. Hook one up to the console and the other to the RF box. then get the adapter to put it on your tv.

[Opa Opa]

Plug one of these into your television...

...and all you need is the cable from system to tv.

[noiseredux]

Plug one of these into your television...

...and all you need is the cable from system to tv.

THIS. I just bought one of these myself.

[KDub]

I suggest driving (or calling first) to your local radio shack for one of those instead of ordering one. For the same price (if not cheaper) you pay at most retro stores you can get a better quality one, usually gold plated too. Radio Shack part #278-276

[Jamisonia]

I use this for consoles that only have a lone RCA input on them.

+

Radioshack Product # 278-290


Plug that into the console then use a good piece of quad shielded coaxial cable. Since these consoles output audio and video on the same line you want as much shielding as possible. More consoles can benefit from this way of connecting than the way others have described. The Atari 7800, Intellivision, and Famicom can all be connected this way. It sounds like the Colecovision connects this same way.

Using the other type of connector is your only option with consoles like the Atari 2600 that have the RCA cable hard wired. So you use that other connector at the TV end, but the quality is lower. There is no reason for consoles that have the RCA port on them, to use a piece of low quality, poorly shielded RCA cable then convert it to an F connection at the TV anyway.

[flamepanther]

I've tried the NES RF adapter, and it doesn't work, for some reason. I can confirm that Atari and Radio Shack adapters work well.

Plug one of these into your television...

...and all you need is the cable from system to tv.

THAT is what I use for mine, however.

[Hobie-wan]

I've tried the NES RF adapter, and it doesn't work, for some reason. I can confirm that Atari and Radio Shack adapters work well.

Indeed, I tried the NES RF box with my 2600 once and barely got a picture at all.

[GamersInControl]

Thanks for all the info guys, got the part at Radio Shack!

[GamersInControl]

Got to test these bad boys out, the one in the box was like new!

coleco.jpg (95.42 KiB) Viewed 2215 times