XBox controller -> USB - No soldering..??

[Rurouni_Fencer]

Thanks for all the help, everybody! I actually snipped a 360 breakaway cable, strippped its wires, and with the help of some black electrical tape I twisted and connected said breakaway cable to an old hamburger (fat) xbox controller. Worked like a charm. Was able to transfer everything and get UnleashX up and running.. Now to find some emulators. (I'm looking to go the AID route.)

Again - thanks for all the help, guys!

[Satoshi_Matrix]

I recommend soldering if you want anything more than a temporary connection.

For emulators, check out CoinOps Reignite, really great MAME emulator for Xbox 1.

[Rurouni_Fencer]

I recommend soldering if you want anything more than a temporary connection.

For emulators, check out CoinOps Reignite, really great MAME emulator for Xbox 1.

Thanks for the suggestion - I'll try it tonight! I'm rocking MamedoX now and, while its great for the few games I got working, I'm running into a lot of Malloc errors.. If CoinOps works better, I'll be in KoF heaven...

[jinn]

I recommend soldering if you want anything more than a temporary connection.

For emulators, check out CoinOps Reignite, really great MAME emulator for Xbox 1.

Thanks for the suggestion - I'll try it tonight! I'm rocking MamedoX now and, while its great for the few games I got working, I'm running into a lot of Malloc errors.. If CoinOps works better, I'll be in KoF heaven...

For KoF use KawaX or Final Burn XXX

[optmusprimenumber]

man, i just did one of these... twists, tape, shrink tube and some more tape cuz the tube wouldn't fit over the taped wires, crap, wish i knew of those connectors... i bet there's some down in our garage. i might have to improve it... hope the shrink tube comes off.

[xxstatic]

http://cgi.ebay.com/New-USB-Adapter-Cable-XBOX-Controller-PC-MS-/400184490200?pt=Video_Games_Accessories&hash=item5d2cdab8d8

Not that expensive and best of all.....no soldering, cutting, crimping, taping.....

[optmusprimenumber]

http://cgi.ebay.com/New-USB-Adapter-Cable-XBOX-Controller-PC-MS-/400184490200?pt=Video_Games_Accessories&hash=item5d2cdab8d8

Not that expensive and best of all.....no soldering, cutting, crimping, taping.....

eh, it's fun to make stuff

[MrAfterFx]

To tell you the truth soldering is the best you can do for a mod. You gain experience and you will appreciate it more when completed. But if this is a one time thing you can just get the converter but if you plan on having a soldering iron in case you can get a kit with some liquid flux and a pencil tip aswell for the iron. You can pick it up locally at radioshack.