Hi, can someone point me to a good reference point on what I would need to buy to hook up a NTSC SNES and Genesis 2 to receive the best quality picture?
I've searched and find bits and pieces but am still "in the dark."
Thanks!
SCART Help for SNES & Genesis 2
- aka DaBigKahuna
- 24-bit
- Posts: 104
- Joined: Sun Feb 14, 2010 1:05 pm
- Location: NE Mesa, AZ
SCART Help for SNES & Genesis 2
Last edited by aka DaBigKahuna on Sun Feb 14, 2010 1:49 pm, edited 1 time in total.
Re: SCART Help for SNES & Genesis 2
For a SNES you need to get a SNES specific RGB cable. Avoid all cables that say 'N64/GC/SNES' compatible. They aren't compatible with the SNES at all. They'll show a picture briefly and then go black.
If you do happen to get one of these cables by mistake you can modify them to work correctly but it does require a minimal amount of soldering skill and equipment. The mod is here:
http://www.mmmonkey.co.uk/console/ninte ... es-rgb.htm
Of course this is only for PAL systems I don't know whether or not you are using an NTSC SNES or not.
If you do happen to get one of these cables by mistake you can modify them to work correctly but it does require a minimal amount of soldering skill and equipment. The mod is here:
http://www.mmmonkey.co.uk/console/ninte ... es-rgb.htm
Of course this is only for PAL systems I don't know whether or not you are using an NTSC SNES or not.
Marurun wrote:Don’t mind-shart your pants, guys
- aka DaBigKahuna
- 24-bit
- Posts: 104
- Joined: Sun Feb 14, 2010 1:05 pm
- Location: NE Mesa, AZ
Re: SCART Help for SNES & Genesis 2
NTSC - thanks for the prompt reply. I apologize for not clarifying.
