Atari Jaguar Power Brick Question
-
ReddMcKnight
- 128-bit
- Posts: 833
- Joined: Fri Jan 08, 2010 7:30 pm
- Location: USA
- Contact:
Atari Jaguar Power Brick Question
OK. So I'm getting my Atari Jaguar today, but it's coming with a Third Party Power Brick and a Third Party RF Switch. Basically, I'd like to know if it's safe to use a Power Brick with a Voltage lower than 9V. If yes, how many Vs should it have?
Made by the extremely talented MrAfterFx!
My Blog, Hardcore Old-School: http://www.rfgeneration.com/blogs/ReddMcKnight/
-
ShadicChao
- 24-bit
- Posts: 155
- Joined: Mon Nov 30, 2009 8:26 pm
Re: Atari Jaguar Power Brick Question
OVER 9000 V!
But no it should be its original or v it was made for or it wont turn on and the fuse will burn up.
But no it should be its original or v it was made for or it wont turn on and the fuse will burn up.
Re: Atari Jaguar Power Brick Question
Haven't played my Jaguar for over a year now, since soon after buying it on ebay. I believe you can run it off about 7.4v but would have to check, might be that was after a minor mod. You can easily wire the plug to composite and stereo audio if you like, I did it a while back. If you need pics or details, shoot me a PM and i'll open my Jaguar up and have a look for you.
I am the Bacman