So I was cleaning out the reat seat cushion of this old car

Talk about just about anything else that is non-gaming here, but keep it clean
User avatar
DuManchu
32-bit
Posts: 231
Joined: Mon Nov 24, 2008 2:31 pm
Location: Olathe, KS
Contact:

Re: So I was cleaning out the reat seat cushion of this old car

Post by DuManchu »

Jrecee wrote:I want to restore a 240-280z but my automotive knowledge ends at changing a tire and checking the oil. I think I'll do it anyway.

I'd rather have an old challenger but that's not in the budget.
That's the best way to learn. Just jump in!

Working on an old Z-car should be pretty easy, not many electronics compared to today's vehicles.

Keys to remember when doing lots of automotive work:
1. Label EVERYTHING (doesn't matter if you know the part or not, just write something on it you'll remember it by)
2. Don't cut any wires unless you are positive as to what they do.
3. Find a good forum with lots of writeups, this will save you boatloads of time.
4. Get a factory service manual, don't use a Haynes manual unless that's the only thing available.
5. Take your time.
Systems: Atari 2600, Atari Jaguar, NES, SNES, N64, GameCube, Wii, Genesis 3, Genesis 2, 32X, Sega CD (model 2), Saturn (model 1), Dreamcast, PS1, PS2, Xbox (Modded), Xbox 360, GameBoy, GBA SP, Game Gear, PSP... always adding more
User avatar
Jrecee
Next-Gen
Posts: 4520
Joined: Sat Dec 06, 2008 10:33 pm

Re: So I was cleaning out the reat seat cushion of this old car

Post by Jrecee »

DuManchu wrote: That's the best way to learn. Just jump in!

Working on an old Z-car should be pretty easy, not many electronics compared to today's vehicles.

Keys to remember when doing lots of automotive work:
1. Label EVERYTHING (doesn't matter if you know the part or not, just write something on it you'll remember it by)
2. Don't cut any wires unless you are positive as to what they do.
3. Find a good forum with lots of writeups, this will save you boatloads of time.
4. Get a factory service manual, don't use a Haynes manual unless that's the only thing available.
5. Take your time.
Haha yeah I won't be cutting any wires. Last time I messed with car wiring trying to install a cd player I ended up buying a new car lol. I won't be starting from scratch either, I want to find something I can at least drive home and just work on at a slow pace as I get more funds. . .Otherwise I'll either A.)Rush to get it done so I can drive it and go into debt or B.)completely lose interest and end up selling it in 2 years.
Haoie
128-bit
Posts: 786
Joined: Sat Jun 21, 2008 8:43 pm
Location: New Zealand

Re: So I was cleaning out the reat seat cushion of this old car

Post by Haoie »

I say they look like caveman cigars.
If each mistake being made is a new one, then progress is being made.
skate323k137
Next-Gen
Posts: 1271
Joined: Sun Sep 16, 2007 11:26 am
Location: Lansing, MI

Re: So I was cleaning out the reat seat cushion of this old car

Post by skate323k137 »

Jrecee wrote:I want to restore a 240-280z but my automotive knowledge ends at changing a tire and checking the oil. I think I'll do it anyway.

I'd rather have an old challenger but that's not in the budget.
A buddy of mine spent a couple years restoring a 280z, that thing was sweet. you'll definitely want a daily driver in the mean time if you're taking on a project like that.
Image
Need FreeMCboot? I'll install it on your PS2 Memory Card for free if you cover postage both ways.
Consoles: I have too much stuff
Arcade: No seriously, I have too much stuff. Someone grab a shovel and dig me out of my basement.
Post Reply