GunCon 2 RCA Splitter Replacement

[LentFilms]

I just recently got some GunCon 2's for a nice price, however, their missing this cable to connect them to the CRT.

Basically, the two female ports on the right is where you plug your GunCons, while the male bit at the left plugs into the TV. Then you piggyback the PS2's composite cord (or the green cable of component) into the back of the male that's connected to the TV.
(here's a video demonstrating)
https://www.youtube.com/watch?v=828YXPfUCK8

As far as I can tell (by eye balling it), this is just a three way Y-Splitter. Couldn't one just couple two of these splitters together to get the same effect?


Does the above sound correct or does the the extra cable do allot more then just "merging the signals"?
I would greatly appreciate some feedback. I would imagine someone out there has replaced one of these cables at one point.

[LentFilms]

Well, I went ahead and ordered two of these from monoprice,
http://www.monoprice.com/Product?p_id=7186
I'll let you guys know if it works.

[Fragems]

I think that should work I have one and there isn't anything special about the cable as far as I can tell it's just a splitter.

[LentFilms]

Well, the splitters came today and they didn't work...I just get a "no-signal" on my TV when more then one RCA plug is plugged in.
I'm at a bit of a loss on what to try next.

[Fragems]

Could just buy a set of guns with the cable they aren't to overly pricy on ebay if you can catch them.

Here is two guns plus the cable for $20 shipped.

http://www.ebay.com/itm/Set-of-2-Namco- ... SwAKxWXzut