modchip help

Post by **kommiekazie** » Fri Jul 14, 2006 1:51 pm

I got my modchip today, hooked it up and it powers up and only plays music CD-Rs and originals both. I tried a+b and it didn't work... help? it's a 32-pin

edit: the blue a+b wire just fel off

Can I just solder from point a to b if the problem was a loos wire?

Post by **Mozgus** » Fri Jul 14, 2006 3:44 pm

Yeah, I just globbed solder between A and B. Made one line.

Post by **kommiekazie** » Fri Jul 14, 2006 4:36 pm

it still doesn't seem to work...

Post by **racketboy** » Fri Jul 14, 2006 5:45 pm

Yes, you can just re-solder the wires in place.

Also, was it hard to get the chip to slide into its plug?
If so, try to file down the edges of the part the plugs into the system.

Post by **kommiekazie** » Sat Jul 15, 2006 9:06 am

Yes, it's in place but I think the mod is just dead now, I probably killed the connectors with the soldering iron.

Post by **racketboy** » Sat Jul 15, 2006 9:33 am

Which connectors?

Post by **kommiekazie** » Sat Jul 15, 2006 10:45 am

The little places where the wires are suppose to be/soldered. There is no more power to the system when I connect it to the strip. So I assume I killed the chip.