Anyone know where to get pink 28mm buttons?

[noiseredux]

so a part of me would like to mod my 2nd Agetec w/ pink buttons (so that as it sits to the right of the Agetec w/ green buttons, the two resemble the color scheme of an Astro City cab). However, the Agetec uses 28mm buttons. Sanwas and most common sticks nowadays use 30mm buttons. So most dudes just Dremel the holes in the Agetec until the 30mm buttons fit. I don't seem to know where my Dremel is these days. And to be honest, I'm not really thrilled w/ the idea of doing that if I don't have to.

I have found multiple people that used Crown cwb203c buttons without having to make the holes bigger. However, I can't find pink ones. And actually I'm not even sure that cwb203c's are 28mm... I think they're something smaller but will work w/ the Agetec holes.

So I guess what I'm saying is I don't know what I'm talking about and could use some help.

[fastbilly1]

Sanwa OSBF-24 buttons should be 28mm

[noiseredux]

Sanwa OSBF-24 buttons should be 28mm

really? Seems if it was that simple then everyone who modded their Agetec would just use those Sanwa's instead of going through the trouble of making the holes bigger to fit 30mm Sanwas... no?

[Stark]

http://www.sourcingmap.com/arcade-games ... 35102.html

[fastbilly1]

Sanwa OSBF-24 buttons should be 28mm

really? Seems if it was that simple then everyone who modded their Agetec would just use those Sanwa's instead of going through the trouble of making the holes bigger to fit 30mm Sanwas... no?

They usually cost more and are not as robust as the 30mms.

[noiseredux]

http://www.sourcingmap.com/arcade-games-ac-250v-15a-pins-momentary-push-button-28mm-hot-pink-p-235102.html

thx dood. Only 2 in stock though?

[noiseredux]

Sanwa OSBF-24 buttons should be 28mm

really? Seems if it was that simple then everyone who modded their Agetec would just use those Sanwa's instead of going through the trouble of making the holes bigger to fit 30mm Sanwas... no?

They usually cost more and are not as robust as the 30mms.

Interesting... if I can confirm they will fit in the Agetec, and if I can find em in pink, then this might be my solution.

[Stark]

http://www.sourcingmap.com/arcade-games-ac-250v-15a-pins-momentary-push-button-28mm-hot-pink-p-235102.html

thx dood. Only 2 in stock though?

Yeah it said something about you could order and they get more in all the time? Not sure, good luck!

[fastbilly1]

http://www.sourcingmap.com/arcade-games-ac-250v-15a-pins-momentary-push-button-28mm-hot-pink-p-235102.html

thx dood. Only 2 in stock though?

Chinese bootlegs to the rescue?
http://www.ebay.com/itm/10x-Arcade-Push ... 3a8ba3bbe8

[noiseredux]

Chinese bootlegs to the rescue?
http://www.ebay.com/itm/10x-Arcade-Push ... 3a8ba3bbe8

well damn. $10 for 10 buttons and free shipping? Sigh. I almost feel like I have to try those...

EDIT: though, I think I'm looking for screw-in buttons not snap-ins. I think it was the screw-in part that makes them work without having to mod the case since they don't fit EXACTLY via snapping in.