So I ordered this adapter along with a 1 slot board (as this was cheaper than finding any multi slot board) and the board should get here tomorrow. The adapter still has not shipped it seems, so my question is, would it be ok to use the MVS harness straight to the 1 slot board if I were to unplug all autio related items IE: amp, and speakers? From what I undertand the difference between MVS and JAMMA is the audio hookup.fastbilly1 wrote:Some 2 slots are JAMMA, but most are MVS. Because your board has controller hookups, Id wager that it is MVS. If you go with a 1 slot board I highly recommend getting one of these bad boys:mjmjr25 wrote:1-slot neo boards are straight JAMMA, 2-4-6 are not iirc, not sure if you can straight swap a 1-slot into a 2-slot setup, you maybe can w/a neo-->jamma adapter, just research that part first. Worst case scenario you have to spend an extra $20 to get a 2-slot instead, but i've seen plenty of damaged 1 and 2 slots rejuvenated from leaky batteries on the neo boards. Keep us posted.
http://www.jammaboards.com/store/jamma- ... a2mvs.html
Then you can plug in whatever JAMMA boards support your control scheme, like a Sega Titan Video or a JAMMA Dreamcast. I thought about a Dreamcast for a long time, so I could play Soul Calibur in my 4 Slot
I just want to check out the monitor and make sure it looks good, and hate waiting.




