Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Need help with your PC or Modding Projects?
User avatar
theclaw
Next-Gen
Posts: 1351
Joined: Fri Jul 17, 2009 10:46 pm
Contact:

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by theclaw »

Let's start with this. See how it goes.

SCART for PS1 and Gamecube.
Component for PS2 and Wii.
Lum fan.
BitFaced
64-bit
Posts: 347
Joined: Sun Mar 17, 2013 6:35 pm

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by BitFaced »

theclaw wrote:Let's start with this. See how it goes.

SCART for PS1 and Gamecube.
Component for PS2 and Wii.
Any specific brand cables in particular?
User avatar
theclaw
Next-Gen
Posts: 1351
Joined: Fri Jul 17, 2009 10:46 pm
Contact:

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by theclaw »

Not really. I'm in USA.
Lum fan.
User avatar
bmoc
Next-Gen
Posts: 1910
Joined: Thu May 19, 2011 1:36 pm

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by bmoc »

You should still be able to find official Nintendo and Sony brand component cables brand new. Just look for PS3 component cables for your PS2. They are the same cable.

As for the scart cables, I am actually looking for a good PS1 scart cable myself. I got one from an ebay seller and the brand is Piranha. I am not sure it is wired correctly as the sync was all distorted. I got that one based off of some random forum post where someone had a good experience with one. I am going to try it again with a sync cleaner when I get one in.
BitFaced
64-bit
Posts: 347
Joined: Sun Mar 17, 2013 6:35 pm

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by BitFaced »

bmoc wrote:You should still be able to find official Nintendo and Sony brand component cables brand new. Just look for PS3 component cables for your PS2. They are the same cable.

As for the scart cables, I am actually looking for a good PS1 scart cable myself. I got one from an ebay seller and the brand is Piranha. I am not sure it is wired correctly as the sync was all distorted. I got that one based off of some random forum post where someone had a good experience with one. I am going to try it again with a sync cleaner when I get one in.
Found the official PS3/Wii Component cables. Currently a little pricy.
I'm wondering if these SCART cables:
http://www.ebay.co.uk/itm/Sony-Playstat ... 43ba2b18d7
http://www.ebay.co.uk/itm/SONY-PLAYSTAT ... 56517063b4
Are the same as the original official Sony PS1 RGB SCART cable.
Image
And I know there's also an official GameCube SCART cable, but it's also a little pricy currently. Can't I just use the same SCART cable for SNES/N64?
Image
User avatar
bmoc
Next-Gen
Posts: 1910
Joined: Thu May 19, 2011 1:36 pm

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by bmoc »

Neither of those eBay cables say if they are wired for RGB. They may only be transmitting composite video. As for the GameCube, I don't know enough about the PAL versions to say for sure.
User avatar
CRTGAMER
Next-Gen
Posts: 11933
Joined: Tue Jan 05, 2010 11:59 am
Location: Southern California

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by CRTGAMER »

BitFaced wrote:Found the official PS3/Wii Component cables. Currently a little pricey.
Just have to know where to look.

http://www.gamestop.com/ps2/accessories ... used/19643

http://www.google.com/search?q=wii+comp ... CAoQ_AUoBA

CRTGAMER wrote:If is not a CRT, test an inexpensive connection first. Maybe try a component cable which can be found on the cheap with the PS2. Test run a few PS2 games that have the 480p option. If you try NTSC Gran Turismo or NTSC Tourist Trophy, these two games can go up to 1080i. Once you see the results, then you can decide on investing in modding and or obtaining expensive cables for your other consoles.
Image
CRT vs LCD - Hardware Mods - HDAdvance - Custom Controllers - Game Storage - Wii Gamecube and other Guides:
CRTGAMER Guides in Board Guides Index: http://www.racketboy.com/forum/viewtopi ... 5#p1109425

Image
Image
User avatar
theclaw
Next-Gen
Posts: 1351
Joined: Fri Jul 17, 2009 10:46 pm
Contact:

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by theclaw »

BitFaced wrote:Image
And I know there's also an official GameCube SCART cable, but it's also a little pricy currently. Can't I just use the same SCART cable for SNES/N64?
Image
That PS1 cable shown is not SCART. It's wired for TVs sold in Japan.

N64 lacks official RGB output, including Europe.

SNES uses a different RGB cable from the GameCube.
Lum fan.
BitFaced
64-bit
Posts: 347
Joined: Sun Mar 17, 2013 6:35 pm

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by BitFaced »

CRTGAMER wrote:
BitFaced wrote:Found the official PS3/Wii Component cables. Currently a little pricey.
Just have to know where to look.

http://www.gamestop.com/ps2/accessories ... used/19643

http://www.google.com/search?q=wii+comp ... CAoQ_AUoBA

CRTGAMER wrote:If is not a CRT, test an inexpensive connection first. Maybe try a component cable which can be found on the cheap with the PS2. Test run a few PS2 games that have the 480p option. If you try NTSC Gran Turismo or NTSC Tourist Trophy, these two games can go up to 1080i. Once you see the results, then you can decide on investing in modding and or obtaining expensive cables for your other consoles.
Oh so the cables (Component and Scart) don't HAVE to be official, right?
User avatar
theclaw
Next-Gen
Posts: 1351
Joined: Fri Jul 17, 2009 10:46 pm
Contact:

Re: Best Output for PAL PS1, PS2, Wii & GameCube for a HDTV

Post by theclaw »

Just correct wiring for the system you want.

On top of that PAL SNES has different RGB cables from an NTSC SNES.
Confusing...
Lum fan.
Post Reply