JVC X'Eye won't spin discs

[Rawkmann]

I opened it up and the gears try to work but looks like they are seized up. Any ideas?

[ApolloBoy]

Try regreasing the CD mech and see if you can get it free.

[Rawkmann]

I noticed that the laser eye moves freely, but the disc won't actually spin at all. Is it possible I need to replace the motor that turns the CD? If so, where would I purchase something like that.

[ApolloBoy]

I noticed that the laser eye moves freely, but the disc won't actually spin at all. Is it possible I need to replace the motor that turns the CD? If so, where would I purchase something like that.

Ah, sounds like a bad spindle motor then. Also what power supply are you using with it? If you're using a Genesis 2 power supply it won't provide enough amperage for the entire system.

[Rawkmann]

I will look into getting an AC with the appropriate voltage. I was using a Genesis 2 AC just to test. Would it not have enough power to spin the CD?

[ApolloBoy]

I will look into getting an AC with the appropriate voltage. I was using a Genesis 2 AC just to test. Would it not have enough power to spin the CD?

You need to use a power supply that provides at least 1.5 amps, the Genesis 2 power supply only outputs 850 mA so it's not enough to power the CD drive. Make sure it's 9V and tip positive as well.

[Rawkmann]

Awesome, thank you so much!