.

Website · Post by **Hobie-wan** » Sun Dec 13, 2009 3:07 am

Is it making a groaning noise after it appears to close, then opens back up?

Post by **Sparkster** » Sun Dec 13, 2009 3:54 am

Website · Post by **Hobie-wan** » Sun Dec 13, 2009 4:15 pm

Hmm, even without the noise, it could be that the belt is worn out. Once the tray closes it has to crank up the spindle and laser assembly to pick the disc up off the tray. When you have it close, does that part raise at all? If it doesn't, its usually that the black rubber belt is stretched and old.

Post by **Sparkster** » Sun Dec 13, 2009 7:47 pm

Website · Post by **Hobie-wan** » Sun Dec 13, 2009 8:42 pm

Hmm, if it fully pulls up and starts to spin the disc to read it, the I don't know.

Post by **sneth** » Sun Dec 20, 2009 2:15 pm

clean the laser.
if the drawer and spindle are moving the tray correctly, then it's most likely laser related.
If your laser is getting weak ,you may have to adjust the pot. This will buy you some time.

Post by **Sparkster** » Tue Dec 22, 2009 2:49 pm

Website · Post by **Hobie-wan** » Tue Dec 22, 2009 4:23 pm

Woo!

Maybe something was misaligned ever so slightly, one of those take apart and reassemble and it works kind of things.

.

.

Re: Sega CD model 1 keeps ejecting the disk tray

.

Re: Sega CD model 1 keeps ejecting the disk tray

..

Re: Sega CD model 1 keeps ejecting the disk tray

Re: Sega CD model 1 keeps ejecting the disk tray

.

Re: Sega CD model 1 keeps ejecting the disk tray